- Home
- SS Shots Brass Forging
SS Shots Brass Forging Manufacturers in Thailand and Suppliers in Thailand
Pune Abrasives Pvt. Ltd. is leading SS Hot Brass Forgingmanufacturers in Thailand and suppliers in Thailand. good-quality brass parts by means of hot forging. We are the company that produces robust and accurate components to different industries based in Pune, India. Our reputation of reliability and craftsmanship has developed over the years. We sell under own brand and we are just manufacturers of SS Hot Brass Forging. We carry significant certificates that conclude our work to be of high standards of quality and safety. We have been in existence since a long time and have the required many years of dedicated services to customers in sectors. The type of business we have is simple, to create the finest SS Hot Brass Forging products that are able to endure time.
About SS Hot Brass Forging
SS Hot Brass Forging is brass metal shaped through heating it to high temp and pressure using special tools. This renders the brass malleable and easily caused into powerful components without fracturing. The process enhances the inner structure of the material to increase its strength. It is extensively applied in fittings and hardware. Hot forging will guarantee good flow of grain in the metal to provide a permanent performance.
Types of SS Hot Brass Forging
As SS Hot Brass Forging manufacturers in Thailand, according to die types we provided different types which are given below.
by Die Type
- Closed Die Forging (Impression Die Forging): This is the most widespread technique on brass. The brass billet is inserted in a die cavity and beaten or pressed out until it becomes shaped like the die.
- Open Die Forging (Smith Forging): The billet is struck between simple or flat shaped dies, where a material is allowed to flow freely. It works with the simpler and large shapes and demands a lot of operator skill.
- Flash-less Forging: Extraction: This is an accurate process in which the volume of the material is strictly regulated to the volume of the final product to avoid the extraction of the material (flash).
Equipment Classification.
- Friction Screw Press Forging: Friction screw presses (100T-400T) are applied in order to achieve rapid and accurate deformation, which is best applied in large volume brass part production.
- Hydraulic Hot Forging: It involves high-pressure hydraulic presses, which force the heated brass into shape gradually, though at a steady rate, to offer high structural integrity.
- Mechanical/Pneumatic Press Forging: applied in the high-speed forging of smaller and simpler components made of brass of SS Hot Brass Forgingsuppliers in Thailand.
Differentiated Forging Processes.
- Upset Forging (Upsetting): This process is applied to enlarge the cross-sectional area of a bar at one end (e.g. forming the head of a valve stem) by accumulating material.
Net-Shape / Near- Net-Shape Forging / This is also called precision forging and it is used to produce parts that do not or require minimal final machining, thereby minimizing the waste and cost.
- Isothermal Forging: A high-temperature process in which the dies are heated to the same temperature or close to the same temperature as the workpiece, so as to reduce cooling and permit complex and thin, and hence, thin-walled, components.
Technical Specifications of SS Hot Brass Forging
We've added below a specialized table SS Hot Brass Forging in Thailandthat provides furthertechnical specification information
| Specification Parameter | Closed Die (Impression) | Open Die (Smith) | Flash-less (Precision) | Isothermal Forging |
|---|---|---|---|---|
| Forging Temperature | 650∘C–800∘C | 700∘C–850∘C | 680∘C–750∘C | 700∘C–750∘C |
| Die Temperature | 200∘C–300∘C | Ambient to 150∘C | 250∘C–350∘C | Same as Workpiece |
| Pressure Range | 100T – 600T | 50T – 200T | 150T – 400T | 100T – 300T (Constant) |
| Dimensional Tolerance | ±0.2 mm | ±1.0 mm to 2.0 mm | ±0.05 mm | ±0.02 mm |
| Material Waste (Flash) | 5% – 15% | High (Manual Trimming) | 0%–2% | <1% |
| Surface Finish (Raw) | 3.2−6.3μm Ra | Rough / Uneven | 1.6−3.2μm Ra | 0.8−1.6μm Ra |
| Typical Equipment | Friction Screw Press | Pneumatic Hammer | Hydraulic/Servo Press | Heated Hydraulic Press |
Benefits of SS Hot Brass Forging
We as SS Hot Brass Forging suppliers in Thailand, according to items we provided different benefits which are given below.
Stronger Parts
Hot brass forging produces parts that are of high strength because their grain structure is refined. The intense heat and pressure orient the metal grains thus making them wear resistant compared to cast items.
Better Durability
Brass that is forged withstands corrosion and fatigue. The process eliminates weak points resulting into prolonged life under harsh conditions. SS Shots For Brass Forgingspares the replacement expenses during busy operations.
Improved Machinability
Machine brasses are easily forged and it is easy to finish after forging. This gives it a homogenous structure that lowers the wear of its tools in cutting or shaping. This accelerates the rate of production among manufacturers.
Cost Efficiency
Hot forging produces less waste material as compared to others. It generates near-net, reduces additional machining requirements. End users are able to have bulk runs at reduced costs.
Enhanced Sealing
Forged brass has compact seals in fittings by virtue of dense material. It avoids leakage as compared to fluids. This consistency enhances security in usage.
Characteristics of SS Hot Brass Forging
Straight grains have high tensile strength.
Very good corrosion resistance.
Good forming capabilities of complex shapes.
No internal positional voids.
Better post forged appearance.
Bendable to plate or polish ornamentally.
Applications of SS Hot Brass Forging
We serve as SS Hot Brass Forging suppliers in Thailand, it is applicable in different sites which are given below.
Plumbing Fittings
SS Hot Brass Forging is a producer of quality and dependable valves and connectors to water systems. These sections are able to contain pressure and block leakages. These guarantee a flow of traffic in houses and premises.
Electrical Components
The metallic contacts and terminals are made of forged brass which is very conductive. These resist arcing and vibration in wiring systems. SS Hot Brass Forgingmanufacturers in Thailandare therefore suitable in switches and outlets.
Automotive Parts
Fuel and brake lines are firmly connected using hot forged brass. An engine heat and road shock strength are still there. Cars can be secure with these strong components.
Marine Hardware
Boat fittings made of brass forgings resist corrosion by sea water. These do not rust fast when tying ropes and valves. Docks and ships rely on them to last long.
Industrial Valves
Gas and fluid sealing in factories are done by forged brass bodies. These work without difficulties at different pressures. When the production is continuous, the maintenance remains low.
Why Chooseus for SS Hot Brass Forging in Thailand
Own brand in case of successful deliveries.
Good customer support at all times.
It heats brass to be easily shaped under pressure to make stronger parts. This surpasses casting of hardness and seals.
These withstand years of corrosion and stress in severe environments. When used properly, life becomes long without a lot of changing.
Yes, we make shapes to your designs using our experience. Quick Pune delivery ensures that projects are on track.
